| ＜Features＞ |
| ● |
Available up to 610mm by 1mm pitch |
| ● |
Various grades are available. "304 MAC" is good in machinability. |
| ● |
Contribute to save cost by reducing machining process. |
|
| ＜Application＞ |
| Material for wide channel, wide flange beam, plate, doors, rails for water gate, flange of large diameter tube and etc. |
| ＜Applicable Size＞ |
 |
Yellow range shows available flat product size. Standard length between 3m to 6m.
Round edge flat products; thickness of 9,12,19,25,30mm are avalable. |
| ●Quality Information |
＜Tolerance＞
Tolerance of thichness and width （mm） |
| Thickness |
Thickness by width range |
| >=50mm |
50mm<=150mm |
| >20mm |
±0.4mm |
±0.5mm |
| 20mm<=40mm |
±0.8mm |
±1.0mm |
| <40mm |
− |
±1.5mm |
|
|
Warpage
|
： |
>=3mm/1m length.Full length mm×全長（m）/1m 以下 |
| Length |
： |
＋40、−0mm |
|
|
| ●Square Bar |
＜Applicable Size＞
（Opposite side length、Unit:mm） |
Opposite side
（mm）
Length
3〜6m |
8.5 |
10 |
10.5 |
11 |
11.5 |
12 |
13 |
13.5 |
14 |
14.5 |
15 |
15.5 |
| 16 |
16.5 |
17 |
17.5 |
18 |
19 |
20 |
20.5 |
21.5 |
22 |
23 |
24 |
| 25 |
26 |
27 |
28 |
30 |
32 |
32.7 |
34 |
35 |
36 |
38 |
40 |
| 43 |
45 |
50 |
55 |
60 |
65 |
70 |
75 |
90 |
100 |
|
|
|
|
| ●Quality Information |
＜Tolerance＞
Tolerance of opposite sides （mm） |
| Nominal dimension |
Tolerance |
Notes |
| 15mm >= |
±0.3mm |
Below 75% of size tolerance |
| 15mm <= 25mm |
±0.4mm |
| 25mm <= 35mm |
±0.5mm |
| 35mm <= 50mm |
±0.6mm |
| 50mm <= 80mm |
±0.8mm |
| 80mm <= 100mm |
±1.0mm |
| 100mm <= 120mm以下 |
±1.3mm |
| 120mm <= 160mm以下 |
±1.6mm |
| 160mm <= 200mm以下 |
±2.0mm |
| 200mm < |
±1.2% |
|
|
| Squareness |
： |
90°±2° |
| Warpage |
： |
>=3mm/1m length. |
| Length |
： |
＋40、−0mm |
|
| |
|
