|
"Pla-Ace" Software for
Plastic Mold Steels
|
|
Specifications |
|
|
Material Selection |
|
|
 |
Mold materials : 19 materials + surface treatment
(Nitriding, Cr plating, PVD) |
|
|
Design : New design, Modified design |
|
|
|
|
|
Material Data |
|
|
|
|
Characteristics : Introduction of 19 materials' characteristics, Instructions in use. |
|
|
Heat treatment : Hardening and tempering hardness curves, Dimensional change
(S-STAR, G-STAR, PD613, DC53, DEX20, MAS1C) |
|
|
Bar graph : Corrosion resistance, Wear resistance, Machinability (All 18 materials) |
|
|
Weldability : Hardness distribution of build-up welded part, TIG welding instructions
(PXZ, PDS3, PX4, PX5, NAK55, NAK80, DH2F, PD613, DC53) |
|
|
Relative graph : Hardness (The upper hardness), Corrosion resistance (Including surface treatments),
Wear resistance (Including surface treatments), Toughness, Hand grindability, Mirror surface finished level |
|
|
|
|
|
Trouble Shooting |
|
|
|
|
Pin-hole (Relieving measures in re-polishing), Texture irregularities (Relieving measures in processing again), Weld defects (Repair procedures), Mold damage (Instructions of re-design and re-production) |
|
|
|
|
|
Technical Manuals |
|
|
|
|
"Polishing", "Texture", "Weld repairs", "Mold design" |
|
|
|
|
|
Machining Conditions |
|
|
|
|
Work materials : PXZ, PDS3, PX4, PX5, DH2F, NAK55, NAK80, S-STAR, G-STAR |
|
|
|
|
|
Tools |
|
|
|
|
Unit converter, Formula |
|
|
|
|
System Requirement |
|
|
System |
|
|
|
|
System OS : Windows95, WindowsNT4.0 |
|
|
Memory : At least 32MB (48MB recommended) |
|
|
CPU : Pentium 100MHz or higher |
|
|
DISK : Above 80MB |
|
|
CD-ROM drive : Above 4 times speed (8 times recommended) |
|
|
|
Media |
|
|
|
|
CD-ROM x 1 (CD-ROM is always needed while operating.) |
|
|
|
|
Please see separate list
of prices |
|
|
Pla-Ace Standard Edition |
|
|
|
|
Material selection |
|
|
Mold material data |
|
|
Machining condition |
|
|
Tools |
|
|
|
Pla-Ace Professional Edition |
|
|
Standard Edition plus following functions. |
|
|
|
|
Trouble shooting |
|
|
Technical manual |
|
|
|
|
|
