Products Applied Metal Powder

  • HyperShield
  • E-PLATE
  • Flake-shaped Metal Powders

HyperShield

Daido's "HyperShield", magnetic composite sheets have a dual phase structure with soft magnetic metal powder and synthetic rubber.
Just by attaching to the target areas, significant improvement of RFID antenna transmission and EMI suppression in high frequency bands can be achieved.

Outline

Main Features

  • High permeability and low magnetic losses at 13.56MHz for RFID antennas
  • Superior magnetic properties in GHz-bands for excellent noise suppression
  • Four different thicknesses available (0.12, 0.2, 0.25, 0.5 mm)
  • Rolled coil form also available (except 0.12 mm thickness)
  • Superior flexibility, ready for die-cut and lamination with other films

Typical Applications

  • Improvement of RFID antenna transmission
  • Higher frequency EMC countermeasures for wireless routers and GPS systems
E-PLATE

E-PLATE(Abrasion-resistant plate)

Cost reduction can be realized by the special deposit technique.

Outline

Features

  • Excellent abrasion resistance and corrosion resistance
  • It is possible to produce products thin enough to make them lighter.
  • Rich selection of products
  • Cost reduction can be realized by the special deposit technique.
  • Homogeneous hardening layer can be formed on both the surface layer and the inside.
  • The plate can be easily mounted by welding and static bolts.

Main Applications

  • Fan, Fan housing
  • Chute liner, Hopper
  • Mixer, Mixer liner
  • Inner wall of Cyclone
  • Screw casing, etc.

Products list

Type
Features
Major components
Hardness of hard layers
Shore
Hv
EG
Cold bending is availlable.
Fe-Cr-C-B
65
650
EB
Cr carbides and borides are deposited and abrasion resistance is provided.
Ditto
75
700
EL
Carbides are finely dispersed and abrasion resistance is strengthened.
Ditto
85
850
EE
Complex carbides and borides strengthen the abrasion resistance and heat resistance.
Fe-Cr-W-Nb-Mo-C-B
≧90
1100
EH
It is as hard as the super hard material. Abrasion resistance is exhibited.
Fe-Cr-W-Co-C-B
≧90
1300

Size

Thickness of base material
3~12mm
Thickness of the hard layer
2~9mm(tolerance±1mm)
Width
100~400mm
Length
1000mm

Excellent abrasion resistance

Excellent abrasion resistance

Flake-shaped Metal Powders

Our special manufacturing technique produces flake-like metal powders which exhibit superior magnetic properties. The properties can be adjusted according to the application requirements.

Outline

Main features

  • High aspect ratio flak-shaped powders available with our advanced production technique
  • Annealing and powder surface coating also available
Top of Page